DJI Matrice 5T: What It's All About
Built-in AI models detect more than 20 target types onboard, before a single frame reaches FlightHub 2, and open onboard computing lets a business run its own third-party AI algorithms on the same aircraft. A perception suite combining LiDAR, mmWave radar and full-colour omnidirectional vision handles obstacle sensing at IP55, and a 1280×1024 thermal camera with 176x hybrid zoom works day or night from the same gimbal. This is DJI's standalone Matrice 5T, flown with the new RC Plus 3 Enterprise controller rather than tied to a dock.
Open Edge AI, On-Site Intelligence
Onboard detection now covers more than 20 target types without sending a single frame off the aircraft first, relevant the moment a connection drops or a site has no reliable signal for cloud processing. Open onboard computing goes further, letting a development team run its own custom AI algorithms directly on the aircraft rather than only DJI's built-in models. Paired with FlightHub 2, the same detection data supports multimodal object detection across a fleet rather than staying siloed to one aircraft's own feed.
Thermal Imaging and Enhanced Night Vision
The thermal camera runs at 1280×1024 native resolution with a 2K UHR mode for finer detail on a still frame, and a full-colour wide-angle night vision camera built around a 1/0.98-inch sensor extends usable visual capture well past dusk. Zoom reaches up to 176x hybrid with an IR cut filter, and a 3km laser rangefinder plus NIR auxiliary light support distance measurement and low-light target identification on the same flight. Thermal-visible fusion display and a split-screen multi-camera view put both feeds in front of the pilot at once rather than switching between them mid-task.
Powerful Propulsion, Extended Flight Time
Maximum flight time reaches 59 minutes, with low-noise, high-efficiency propellers keeping the aircraft usable on a noise-sensitive site without a proportional cut to flight performance. Maximum flight speed reaches 23 m/s, relevant on a corridor inspection or dispatch job where covering distance quickly is as important as what the camera captures once on site.
High-Accuracy Surveying, Rapid Modelling
Rolling shutter correction supports higher-accuracy reconstruction directly from captured imagery, and 2D thermal mapping adds temperature measurement and annotation to a mapping output rather than visual data alone. In-flight modelling generates a fast output straight on the remote controller, useful for a decision that needs to happen on site rather than after a full office processing run, and close-range photogrammetry is supported for detailed structural capture.
Transmission, Relay Modes and the Perception Suite
Video transmission reaches up to 40km under IC compliance, dropping to a 20km maximum under CE, the figure that applies across the UK and EU, worth knowing before planning a mission around the higher IC number. Adaptive multi-band switching resists interference automatically, and dual built-in Cellular Dongle 2 modules support 4G connectivity without external hardware bolted on. Multiple relay modes extend coverage further still, though this feature isn't available in regions without 5GHz frequency support, worth checking against local regulations before planning around it.
The perception suite itself combines standard LiDAR and mmWave radar for wire-level obstacle sensing with an omnidirectional, full-colour visual system and Vision Assist, running at an IP55 rating across a -20°C to 50°C operating range. A built-in ADS-B receiver and Remote ID receiver add awareness of nearby crewed and uncrewed aircraft directly into the aircraft's own sensing rather than relying on a separate device.
Next-Generation Core Accessories
The DJI RC Plus 3 Enterprise remote controller is the standard handheld control unit for the Matrice 5T, distinct from the dock-based operation the Matrice 5TD is built around. A high-volume speaker with a built-in warning light and a spotlight combining spot and flood lighting extend the aircraft into public safety and security work directly, and a 515W Charging Hub speeds battery turnaround between flights on a multi-sortie day.
Multi-Mission Adaptability, Custom Pilot Plugins
Automated power line inspection and shipborne takeoff and landing for maritime inspection are both supported directly, extending the Matrice 5T into utility corridor work and vessel-based deployment without third-party workarounds. Third-party plugin support in DJI Pilot 2 lets a business build its own tailored workflow on top of the aircraft's native software rather than working entirely inside DJI's own feature set.
Common Questions
No, they're different products within DJI's Matrice 5 generation. The Matrice 5TD pairs exclusively with Dock 4 for automated missions; the Matrice 5T is flown manually with the RC Plus 3 Enterprise controller.
Up to 20km under CE compliance, the figure that applies across the UK and EU. The 40km figure DJI quotes applies only under IC compliance.
Yes, standard LiDAR and mmWave radar are both part of the built-in perception suite, alongside the full-colour omnidirectional vision system.
Yes, open onboard computing supports third-party AI algorithms directly, alongside DJI's own built-in detection models.
DJI doesn't permit this item's price to be advertised online. Call Drone Safe Store directly to confirm current pricing.
