Mavic 3 Enterprise RTK Specs at a Glance
RTK Fix accuracy, once the module is fitted and connected, is 1cm + 1ppm horizontal and 1.5cm + 1ppm vertical, confirmed on DJI's own spec sheet, identical to the Matrice 4 Series figures. Custom Network RTK, DJI Pilot 2's setting for connecting to any NTRIP service, is confirmed for the Mavic 3 Enterprise RTK on its RC Pro Enterprise controller.
Fitting the RTK Module
The module attaches to the underside of the aircraft, in place of the standard bottom cover, and connects via the aircraft's own expansion port, no soldering or internal disassembly involved. Once fitted, the aircraft recognises it automatically and the RTK controls appear in Pilot 2's settings menu without any separate pairing step.
A Mavic 3 Enterprise bought without the module still flies and captures normally, the RTK Positioning toggle simply won't appear until one is fitted. Removing the module again is just as straightforward, useful for an operator running mixed RTK and non-RTK jobs from the same airframe.
Turning RTK On
Once the module is fitted, the toggle and menu path match every other DJI Enterprise aircraft: Camera View, the three dots menu, then the RTK satellite icon, with RTK Positioning as the main switch. Our DJI RTK setup guide covers this step in full detail; nothing about it changes once the module is present on the Mavic 3 Enterprise.
Correction Source Options for the Mavic 3 Enterprise
Two options apply once the module is fitted. Custom Network RTK connects to any NTRIP provider, our DJI NTRIP connection guide covers the field-by-field setup. An Emlid Reach receiver can also serve as a third-party base over that same Custom Network RTK setting, covered in our Emlid with a DJI Enterprise drone guide.
DJI's own D-RTK 3 station isn't a confirmed pairing for the Mavic 3 Enterprise, its listed compatibility from DJI and Drone Safe Store covers the Matrice 4 Series and Matrice 4D Series specifically. The D-RTK 2 Mobile Station is the DJI-brand base station route for this aircraft instead, connecting through the same Custom Network RTK-adjacent settings on the RC Pro Enterprise controller.
Verifying RTK on Mavic 3 Enterprise Captures
Every photo carries the same rtk_flag metadata covered in our DJI RTK setup guide, a value of 50 for FIX, 34 to 49 for FLOAT. Checking this after a mapping flight confirms the correction held throughout rather than dropping partway through without being noticed at the time, worth the extra minute regardless of which aircraft captured the data.
RTK Network Subscription - 1Y Unlimited
More than 7,500 base stations · Accuracy of 1.5cm with EU Certification
Free Gifts Included
Common Questions
No. Unlike the Matrice 4 Series, RTK is a separate module fitted to the aircraft's underside, sold apart from the drone itself.
Yes. It connects via the aircraft's expansion port with no disassembly required, and can be removed just as easily for non-RTK work.
Not confirmed. DJI and Drone Safe Store both list D-RTK 3 compatibility as Matrice 4 Series and Matrice 4D Series specifically; use the D-RTK 2 Mobile Station for a DJI-brand base station on this aircraft instead.
Both are currently out of stock, so a direct comparison isn't possible at the time of writing; speak to our team for current pricing and availability when stock returns.
1cm + 1ppm horizontal, 1.5cm + 1ppm vertical, matching the Matrice 4 Series figures exactly.
