M350 RTK Compatibility and Accuracy
Custom Network RTK is confirmed for the Matrice 350 RTK on its DJI RC Plus controller. Once connected and holding FIX, the M350 RTK's RTK accuracy is 1cm + 1ppm horizontal and 1.5cm + 1ppm vertical, the same figures quoted on its own spec sheet regardless of correction source.
Setting Up the Connection
The steps are identical to any Custom Network RTK aircraft: RTK settings under Settings or Safety depending on firmware, RTK Positioning toggled on, RTK Service Type set to Custom Network RTK rather than D-RTK 2 Mobile Station, then the host, port, username, password and mount point from your NTRIP provider. Our DJI NTRIP connection guide covers each field and the troubleshooting for a stuck connection in full; nothing about that process changes on the M350 RTK.
Which Service to Use
Emlid Corrections isn't an option here, it's tied to Emlid Reach hardware rather than DJI aircraft. Our RTK Network Subscription works directly with the M350 RTK's Custom Network RTK setting: £1,080.00 for a year of unlimited access across more than 2,000 base stations, or £180.00 for 30 days on single projects.
The alternative to a subscription is a physical base instead. DJI's own D-RTK 2 Mobile Station is the confirmed native option for the M350 RTK, per DJI's own product FAQ, and an Emlid Reach receiver broadcasting over the same Custom Network RTK setting works as a third-party alternative, both covered in our M350 RTK setup guide and our Emlid and DJI RTK drones guide.
M350 RTK Availability
Both current M350 RTK listings on Drone Safe Store are marked discontinued at time of writing, so this guide is written primarily for operators maintaining an existing fleet rather than a new purchase. Speak to our team directly for parts and support availability if you're running M350 RTK aircraft already in service.
RTK Network Subscription - 1Y Unlimited
More than 7,500 base stations · Accuracy of 1.5cm with EU Certification
Common Questions
No. Custom Network RTK works identically across confirmed aircraft; only the credentials you enter change, not the process.
No. It's delivered through Emlid Flow and licensed to Emlid Reach receivers, not accessible from Pilot 2 directly.
1cm + 1ppm horizontal, 1.5cm + 1ppm vertical once the status reaches FIX, matching the M350 RTK's own spec sheet.
Not confirmed. DJI's own FAQ for the M350 RTK confirms the D-RTK 2 Mobile Station specifically; D-RTK 3 compatibility is listed for the Matrice 4 Series and Matrice 4D Series instead.
Current listings are marked discontinued at time of writing; this guide is aimed at operators supporting existing fleets rather than a new purchase.