The New DJI Mavic 3 Enterprise Series

The New DJI Mavic 3 Enterprise Series

The Mavic 3 Enterprise Series Ups Mission Efficiency With A 56x Zoom Camera And RTK Module For Centimeter-Level Precision.

The DJI Mavic 3E and DJI Mavic 3T represent the most significant advancement in compact drone technology in three years, enhancing performance in every area and giving professional users access to the greatest aerial technology available that will enable them to succeed in their daily missions. The Mavic 3 Enterprise Series is based on the DNA of DJI’s flagship Mavic 3 series and has been designed to operate in a variety of commercial jobs.

Survey with Speed with the DJI Mavic 3E

The exceptional feature set of the DJI Mavic 3E makes it possible to conduct very effective mapping and surveying operations without the use of ground control points.

In addition to Intelligent Low-Light Mode, it features a 20 MP wide-angle camera with a 4/3 CMOS sensor and huge 3.3 mm pixels, which considerably increase performance in low light. With a comparable focal length of 162mm and 12MP resolution, its powerful hybrid zoom camera has a range of up to 56x. Motion blur is avoided and quick 0.7-second interval shooting is supported with a mechanical shutter.

See the Unseen with the DJI Mavic 3T

The DJI Mavic 3T has the same tele camera as the Mavic 3E, a 48 MP camera with a 1/2" CMOS sensor, as well as a thermal camera with a Display Field of View (DFOV) of 61° and an equivalent focal length of 40mm with 640 512 px resolution. It was designed to meet the unique needs of aerial operations in firefighting, search and rescue, inspections, and night missions.

To assist professionals in locating hotspots and making prompt decisions, the Mavic 3T's thermal camera provides point and area temperature measurement, high-temperature alarms, colour palettes, and isotherms.

The Mavic 3T's thermal and zoom cameras offer 28 continuous side-by-side digital zoom for simple comparisons with simultaneous split-screen zoom.

Next-Generation Image Transmission

The Mavic 3 Enterprise drones can fly farther and transmit signals with more stability thanks to DJI O3 Enterprise Transmission, which has a maximum control range of 15 km. This gives pilots more confidence while flying. It offers a 1080p/30fps high frame rate live broadcast. Always fly in compliance with local laws and regulations, including flying the drone within the operator's line of sight unless otherwise approved. Transmission distance is a proxy for signal strength.

Worry-free Flights with Enhanced Flight Safety

DJI has always been at the forefront of the drone market in terms of creating cutting-edge safety features, and the Mavic 3 Enterprise series carries on this tradition with better object sensing and navigation algorithms that provide drone pilots with the direction they need to remain safe. The Mavic 3 Enterprise series drones have DJI AirSense, which collects ADS-B signals from surrounding conventional aircraft to alert drone pilots to nearby air activity. Six omnidirectional fish-eye sensors help the upgraded DJI APAS system 5.0 detect obstacles with zero blind spots.

Full Software Suite

 

The Mavic 3 Enterprise series drones are at the centre of an advanced and growing ecosystem of software for drone operations, allowing the aerial platforms to reach their full potential as tools for data gathering, mapping, fleet management and flight operations.

 

DJI Pilot 2 is the revamped flight interface designed to improve piloting efficiency and flight safety. Drone and payload controls can be easily accessed with one tap. Users can access the drone's hardware, video live-stream, and photo data.

 

DJI FlightHub 2, the all-in-one cloud operations management software for drone fleets, allows drone operators to efficiently manage flight operations with route planning and mission management.

 

DJI Terra is the full-featured mapping software for all stages of work, from mission planning to processing of 2D and 3D models.

 

DJI Thermal Analysis Tool 3.0 helps professionals to analyze, annotate and process images captured by the Mavic 3T using DTAT 3.0 to detect temperature abnormalities in their inspections.

A New Suite of Tools Catering for Professionals

The Mavic 3 Enterprise series introduces new tools combining hardware and software for business objectives.

The DJI RC Pro Enterprise is the professional remote for the Mavic 3 Enterprise Series. It features a 1,000 nit high-brightness screen which is visible in direct sunlight and a microphone for clear communication.

The RTK Module enables surveying professionals to achieve centimeter-level accuracy with support for network RTK, custom network RTK services, and D-RTK 2 Mobile Station.

 

The D-RTK 2 Mobile Station is DJI’s upgraded high-precision GNSS receiver that supports all major global satellite navigation systems, providing real-time differential corrections.