BetaFPV Pavo Pico Sub150g Cinewhoop - O3 Bundle
SKU: 01010031_1 ELRS 2.4G_O3BUNDLE
Material Code: 01010031_1 ELRS 2.4G_O3BUNDLE
Brand: BetaFPV
- Sub100 grams!
- 2S Power
- 1x Battery included
- PLEASE NOTE: O3 Air Unit Included, But NOT Installed!
BetaFPV Pavo Pico Sub150g Cinewhoop - O3 Bundle
The split-design HD VTX mounting bracket works with the DJI O3 Air Unit. The side bracket, rubber damper vibration-damping design, lens holder, and antenna have all been strengthened to stop low-frequency vibration and make the HD VTX safer. This makes sure that high-definition movies are output consistently. To start flying, all you have to do is connect the VTX wire and finish the binding process.
A lens filter and a lens safety mount are both included to protect the lens on the DJI O3 camera and keep the high-definition video output stable while the drone is in the air.
The battery slot and HD VTX mounting bracket duct height have been lowered to make flight more enjoyable. They also work with do-it-yourself battery fixing ways, so they can be used with batteries of different sizes and capacities.
The F4 2-3S 20A AIO FC V1 is an improvement over the F4 1S 12A FC V3. It only weighs 5.92 grammes and is best for HD digital VTX. It is great for HD whoops because it has more powerful computing, a fast response time, and stable flying.
The frame is made from PA12 material, which is known for being very resistant to pressure and easy to install.
- Flight Time*: 4min
- Wheelbase: 80.8mm
- Battery: LAVA 2S 450mAh 75C Battery
- FC:, F4 2-3S 20A AIO FC V1
- Props: GF 45mm-3B black propeller
- Motor: 1102 | 14000kv red and black (2022)
- Weight (No Battery): 73.47g (DJI O3)
- Frame: Pavo Pico Brushless Whoop Frame
- HD VTX: DJI O3 Air Unit Kit installation.
- RX Version: Serial ELRS
- FPV Camera: Support DJI O3 Camera
*Note: The flight time is calculated under 8.4V~6.8V
- 1 * Pavo Pico Brushless Whoop Quadcopter
- 1 * DJI O3 Air Unit
- 1 * LAVA 2S 450mAh 75C Battery
- 4 * GF 45mm-3B Propellers
- 1 * USB Parameter Adjustment Cable
- 1 * 5.8G Copper Tube Antenna Package
- 1 * VTX Bracket Screw Package 2 * DJI O3 HD Digital VTX Antenna Mount
- 2 * DJI O3 HD Digital VTX Mounting Bracket
- 1 * DJI O3 Lens UV Protector
- 1 * DJI O3 Lens Protective Case
Submit Your Review
Your email address will not be published. Required fields are marked *